Lampholders

41 Pins
 3y
Collection by
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour.Comes with 2x shade rings to allow a shade with a diameter of 40mm. And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27 Lighting Parts, Diy Lighting, Light Project, Light Fittings, Edison, Ultra Violet, Pendant Lamp, Give, Rust
ES | E27 | Edison Screw Rust Pearl Lampholder with Shade Rings
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour.Comes with 2x shade rings to allow a shade with a diameter of 40mm. And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27
Lampspares
Lampspares
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27 Grip, Cord, Cable, Sapphire, Plating, Diameter, Shades, Pearls
E27 Sapphire Pearl Lampholder With Shade Rings 3970176
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27
Lampspares
Lampspares
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27 Emerald, Spray
ES | E27 | Edison Screw Emerald Pearl Lampholder with Shade Rings
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27
Lampspares
Lampspares
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27 Metal Finishes, Kiwi
10mm Entry ES | E27 Lampholders
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27
Lampspares
Lampspares
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27 10mm, Utensil, Lemon
10mm Entry ES | E27 Lampholders
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. Comes with 2x shade rings to allow a shade with a diameter of 40mm.And a transparent cord grip to allow the lampholder to hang from a cable if needed. #Lampspares #ES #E27
Lampspares
Lampspares
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. #Lampspares #E27 #ES The Incredibles
ES | E27 | Edison Screw Ultraviolet Pearl Lampholder with Shade Rings
This E27 lampholder is a nickle plated lampholder that has been sprayed in a pearl finish colour. #Lampspares #E27 #ES
Lampspares
Lampspares
Antique Brass ES Batten Lampholder 4475065 This lampholder is perfect for creating lighting around the fronts of stages or when creating a Hollywood style vanity mirror unit. Ceiling Light Fixtures, Ceiling Pendant Lights, Pendant Lighting, Hollywood Fashion, Hollywood Style, Mirror Unit, Glass Fit, Batten, Edison Bulb
ES | E27 | Edison Screw Antique Brass Batten Lampholder
Antique Brass ES Batten Lampholder 4475065 This lampholder is perfect for creating lighting around the fronts of stages or when creating a Hollywood style vanity mirror unit.
Lampspares
Lampspares
Old English BC Un-Switched Lampholder 1/2" Entry 5638040 Comes complete with an earth tag on the side and a shandard shade ring. 1/2" female thread in the base to fix onto 1/2" fixing point. Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole. Pendant Light Fitting, Gas Pipe, Thing 1, Bayonet, Powerade Bottle, Old English, Fix It, Drink Bottles
BC | B22 | Bayonet Cap Old English Un-Switched Lampholder 1/2" Entry
Old English BC Un-Switched Lampholder 1/2" Entry 5638040 Comes complete with an earth tag on the side and a shandard shade ring. 1/2" female thread in the base to fix onto 1/2" fixing point. Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole.
Lampspares
Lampspares
Nickel BC Un-Switched Lampholder 1/2" Entry 5638041 Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole. Safety Switch, Flex, Entry, Nickel, Chrome, Bronze
BC | B22 | Bayonet Cap Nickel Un-Switched Lampholder 1/2" Entry
Nickel BC Un-Switched Lampholder 1/2" Entry 5638041 Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole.
Lampspares
Lampspares
Copper BC Un-Switched Lampholder 1/2" Entry 5638042 Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole. Copper Lamps, Thick Ring, Copper Plated, Lamp Holder
BC | B22 | Bayonet Cap Copper Un-Switched Lampholder 1/2" Entry
Copper BC Un-Switched Lampholder 1/2" Entry 5638042 Standard BC or B22 lamp is required. Comes complete with a shade ring and will fit a shade with a 28-29mm hole.
Lampspares
Lampspares
This Brass BC Switched Lampholder 10mm Entry With Stem Lock 5640314 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder. Unwanted, Lamp Shade, Connect, Lock, Switch, Hold On
BC | B22 | Bayonet Cap Brass Switched Lampholder 10mm Entry with Stem Lock
This Brass BC Switched Lampholder 10mm Entry With Stem Lock 5640314 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
Lampspares
Lampspares
This Antique Brass BC Switched Lampholder 10mm Entry With Stem Lock 5640315 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder. Antique Brass
BC | B22 | Bayonet Cap Antique Brass Switched Lampholder 10mm Entry with Stem Lock
This Antique Brass BC Switched Lampholder 10mm Entry With Stem Lock 5640315 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
Lampspares
Lampspares
This Bronze BC Switched Lampholder 10mm Entry With Stem Lock 5640316 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
BC | B22 | Bayonet Cap Bronze Switched Lampholder 10mm Entry with Stem Lock
This Bronze BC Switched Lampholder 10mm Entry With Stem Lock 5640316 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
Lampspares
Lampspares
This Chrome BC Switched Lampholder 10mm Entry With Stem Lock 5640317 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder. C 18, Standard Lamps, Lamp Parts, Bedside Lamp, Wattage, Whiskey Bottle
BC | B22 | Bayonet Cap Chrome Switched Lampholder 10mm Entry with Stem Lock
This Chrome BC Switched Lampholder 10mm Entry With Stem Lock 5640317 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
Lampspares
Lampspares
This Nickel BC Switched Lampholder 10mm Entry With Stem Lock 5640318 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder. Barware
BC | B22 | Bayonet Cap Nickel Switched Lampholder 10mm Entry with Stem Lock
This Nickel BC Switched Lampholder 10mm Entry With Stem Lock 5640318 comes with an internal earth connect rather than one on the side. It also has a shade ring to hold a lamp shade with a 28/30mm diameter hole. This lampholder is a standard B22 lampholder except it has a lock collar at the bottom with an internal locking screw. This prevents any unwanted untwisting of the lampholder.
Lampspares
Lampspares