Crown Bolt 1 in. Stainless Finishing Nails (75-Pack)-03514 - The Home Depot

Crown Bolt 1 in. Stainless Finishing Nails (75-Pack)

Crown Bolt 1 in. Stainless Finishing Nails - The Home Depot

DIY continuous strand weaving looms made with plywood and 1" finishing nails. 3 1/2" and 7". 1/4" nail spacing.  i used a band saw and a scroll saw, and  my dremel in the drill press attachment to pre drill the holes.

DIY continuous strand weaving looms made with plywood and 1 finishing nails. 3 and nail spacing. i used a band saw and a scroll saw, and my dremel in the drill press attachment to pre drill the holes.

Using 1-by-4-inch boards, construct a frame with desired height and width (ours measures 6 ½ feet tall and extends 1 inch beyond the mattress on each side). Have your hardware store cut a piece of garden lattice to fit within the frame and affix to back with finishing nails. Use a picture hanger to mount a small mirror three quarters of the way up the headboard. Paint assembled piece in desired color. For a tonal effect that adds depth without overpowering the space, choose two similar ...

50+ Cheerful & Fun Craft Projects for Spring

width (ours measures 6 ½ feet tall and extends 1 inch beyond the mattress on each side). Have your hardware store cut a piece of garden lattice to fit within the frame and affix to back with finishing nails.

The perfect item for every musician and music lover! This Sheet Music Note String Art is made with sturdy finishing nails, black string, and a

The perfect item for every musician and music lover! This Sheet Music Note String Art is made with sturdy finishing nails, black string, and a

$18 Shiplap Mantle: Quick, easy, & cheap! You'll need: 1 sheet of floor underlay (we got ours from Home Depot for $14) cut into 5.5" wide boards. A sample of bright white paint Finishing nails (ours were 4.5") A Hammer Nickels for board spacing Simply measure the length of the area you want to shiplap & cut boards to the length you need. *Make sure you sand! Line up the first board & nail it into the wall. Place 2nd board on top of the first & use nickels stuck between boards to space out…

$18 Shiplap Mantle: Quick, easy, & cheap! You'll need: 1 sheet of floor underlay (we got ours from Home Depot for $14) cut into 5.5" wide boards. A sample of bright white paint Finishing nails (ours were 4.5") A Hammer Nickels for board spacing Simply measure the length of the area you want to shiplap & cut boards to the length you need. *Make sure you sand! Line up the first board & nail it into the wall. Place 2nd board on top of the first & use nickels stuck between boards to space out…

This DIY Floor Project was made from Plywood, we took 13 full sheets of Plywood and ripped the into 6 in wide and 8 ft long Planks, then glues down with also some finishing nails, Stained and Polyurethaned, Total square footage was 400, Total Cost of this Project was 300.00 and we did a Living Room, Bedroom and Hallway, , Now that's a $$$$$ Saving Project. .. https://www.facebook.com/pages/Trash-To-Treasures/261463607265438?ref_type=bookmark

This DIY Floor Project was made from Plywood, we took 13 full sheets of Plywood and ripped the into 6 in wide and 8 ft long Planks, then glues down with also some finishing nails, Stained and Polyurethaned, Total square footage was Total Cost of this

MAKE A JIG BOARD OF YOUR OWN ~ To make one, draw a 1⁄2-inch grid on the surface of a flat 6-by-12-inch piece of wood. Where lines intersect, drill 3⁄8-inch-deep holes with a 7⁄64-inch drill bit. To keep their depth uniform, mark the drill bit with a piece of tape. Make patterns by slipping 2-inch 6d finish nails into the holes. Wrap wire around the nails, then slip the pattern off the jig.

MKe your own wire jig! With a few tools, you can twist and turn metal into something that is functional and easy on the eyes.

Sephora by OPI Matte Nail Polish: Photo Swatches ❤ liked on Polyvore featuring beauty products, nail care, nail polish, nails, makeup, nail art and sticker nail polish

Didn't have the matte black nail polish so I simply painted my nails black and added black powder from an old black eye shade I had . and it worked perfectly :D

Straight Brads 1-1/2 in. 16-Gauge Straight Electro-Galvanized Finish Nails (1,000-Piece)

Straight Brads 1-1/2 in. 16-Gauge Straight Electro-Galvanized Finish Nails (1,000-Piece)

SpotNails Straight Brads Gauge Straight Electro-Galvanized Finish Nails is designed to work hand-in-hand with our finish nailers.

Slide View: 1: Brass-Finished Nails

Brass-Finished Nails

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and…

12 Simple Storage Solutions for Small Spaces

Pinterest
Search