Vise Lift Modification by jjr2001 -- While the Kurt vise is awesome it is kinda big for the mini mill. The Wilton drill press vise on the other hand is just the right size for the mini mill. Problem is jaw lift. Not any more! While this does not remove all of the lift it reduces it to .001" or so. Not good enough for all milling but good enough for most. When I need perfect I use a machinist vise.  The fix is simple. Remove the "shoe" on the bottom of the moveable jaw and replace it with…

While the Kurt vise is awesome it is kinda big for the mini mill. The Wilton drill press vise on the other hand is just the right size for the mini

Kurt vises

Kurt vises

A Vise Stop for the Kurt Vise

Homemade mill vise and stop featuring 4130 steel jaws fabricated to fit a 6

Reducing the Jaw Lift of a Wilton 11674 Vise for Use on a Mill by jjr2001 - Well we will attempt to improve upon our first Wilton 11674 vise mod and see if we can reduce the jaw lift even more.Homemade Vise Lift Modification - HomemadeTools.netWhile it will not replace the Kurt vise on any large mill it will make a very nice addition to the Mini Mill.A Kurt or even Import milling vise dwarfs the mini mill and I have had good luck with my Wilton so far,just wanted to make it act like a Kurt.

Reducing the Jaw Lift of a Wilton 11674 Vise for Use on a Mill by jjr2001 - Well we will attempt to improve upon our first Wilton 11674 vise mod and see if we can reduce the jaw lift even more.Homemade Vise Lift Modification - HomemadeTools.netWhile it will not replace the Kurt vise on any large mill it will make a very nice addition to the Mini Mill.A Kurt or even Import milling vise dwarfs the mini mill and I have had good luck with my Wilton so far,just wanted to make it act like a Kurt.

A Vise Stop for the Kurt Vise

A Vise Stop for the Kurt Vise

Kurt Vise KV-D60-4-SA Anglock Vise Swivel Base Kurt Vise, Anglock Vise  http://www.handtoolskit.com/kurt-vise-kv-d60-4-sa-anglock-vise-swivel-base-kurt-vise-anglock-vise/

Kurt Vise Anglock Vise Swivel Base Kurt Vise, Anglock Vise Designed to work with D-series Anglock vises for precision clamping, this swivel base

A Vise Stop for the Kurt Vise

Homemade stop for a Kurt machinist's vise constructed from steel rods and blocks.

Kurt Vise Handle - Part No. D100-10A-SA      Hex: 1     Length: 16-1/8" http://www.kurtworkholding.com/handle-assembly-p-410-l-en.html

Kurt Original Equipment replacement vise handles made of solid cast iron for strength and durability from Kurt Workholding Precision Vise, CNC Workholding manuf

Kurt vise handle holders are available in both 6 " and 8 " models. The can be mounted to any surface using the two thru holes on back of the unit. They are made of a high impact material the will last. Branded with the KURT name and made in the U.S.A.

Kurt vise handle holders are available in both 6 " and 8 " models. The can be mounted to any surface using the two thru holes on back of the unit. They are made of a high impact material the will last. Branded with the KURT name and made in the U.

Kurt vise handle holders are available in both 6 " and 8 " models. The can be mounted to any surface using the two thru holes on back of the unit. They are made of a high impact material the will last. Branded with the KURT name and made in the U.S.A.

Kurt vise handle holders are available in both 6 " and 8 " models. The can be mounted to any surface using the two thru holes on back of the unit. They are made of a high impact material the will last. Branded with the KURT name and made in the U.

Kurt Vise Jaws with Threaded Hold-Down Holes

Homemade Kurt vise jaws intended to facilitate the secure positioning of UHMW material for machining. Incorporates seven threaded holes for hold downs.

Snap-Jaws-6HSJ-100-VISE-JAWS-SnapJaws-for-Kurt-Vise

Snap Jaws 6HSJ-100 VISE JAWS SnapJaws for Kurt Vise .100 Step Size

Snap-Jaws-6HSJ-100-VISE-JAWS-SnapJaws-for-Kurt-Vise

Quick change jaws will fit any 6" Kurt Vise

Quick change jaws will fit any 6" Kurt Vise

Pinterest
Search