DIY No Waste Feeder (might try this with 5-gallon buckets instead, since I have some of those.)

DIY No-Waste feeder!

A cheap way to make a “no waste” chicken feeder for those chickens that are messy eaters. With conventional feeders, when chickens peck at the feed, they will pull out…

PVC towel rack  I bought three 10′ pvc pipes (3/4″)8 pvc standard T’s 2 pvc elbows 2 end caps  (Note:  make sure that the standard-T’s, elbows and caps are all the same size as the pvc pipe you’re using, and that they’re not threaded.  The project won’t come together nearly as easily if things don’t fit)    The towel rods were cut at 36″ each – which is the actual width of a standard beach towel.  We built each side by starting with a 24″ piece of pvc (the bottom).  Add a standard T  Add a 8

PVC towel rack

How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/

How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes

Lazy Susan plus PVC elbow to save kitchen cabinets

Lazy Susan plus PVC elbow to save kitchen cabinets

6" 22-1/2 Degree 1/16 Bend Pvc Elbows

6" 22-1/2 Degree 1/16 Bend Pvc Elbows

Pvc Elbow

1-1/4 in. Adjustable PVC Elbow Furniture Grade PVC Fitting

1-1/4" Adjustable PVC Elbow Fitting - Furniture Grade

Adjustable Furniture Grade PVC Elbow connects in. Schedule 40 Size PVC pipe at two points to create any angle between 90 and

1/2" 90 Degree PVC Elbow - Gloss White

1/2" 90 Degree PVC Elbow - Gloss White

1-1/4 in. Adjustable PVC Elbow Furniture Grade PVC Fitting  ....FORMUFIT.COM

1-1/4" Adjustable PVC Elbow Fitting - Furniture Grade

The FORMUFIT in. Adjustable Furniture Grade PVC Elbow connects in. Schedule 40 Size PVC pipe at two points to create any angle between 90 and

PVC Table Cap in White - 1-1/4"

1-1/4" Adjustable PVC Elbow Fitting - Furniture Grade

PVC Table Cap in White - 1-1/4"

4 Inch 22 1/2 Degree Solvent Weld PVC Elbow

4 Inch 22 1/2 Degree Solvent Weld PVC Elbow

The NDS 22 Degree Elbow is made to ASTM specifications and fits both sewer and drain pipe. The elbow is compatible with 4 inch pipe, and is used to con

1-1/4 in. Furniture Grade PVC 3-Way Elbow in Clear

1-1/4 in. Furniture Grade PVC 3-Way Elbow in Clear

Make use of this UV-resistant Formufit FormuClear Clear Furniture Grade PVC Elbow for building boxes, cubes or table platforms.

Lasco SCH40 90 Degree PVC Elbow [3/4" Slip x 1/2" Slip] (406-101)

Lasco SCH40 90 Degree PVC Elbow [3/4" Slip x 1/2" Slip] (406-101)

Pvc Elbow

Lasco SCH40 90 Degree PVC Elbow [3/4" Slip x 3/4" Slip] (406-007)

Lasco SCH40 90 Degree PVC Elbow [3/4" Slip x 3/4" Slip] (406-007)

Pvc Elbow

Parts List 2 – 90 degree PVC elbows 3 – 45 degree PVC elbows 1 – 4-Way PVC Cross 2 – 1 1/4 “ --> 1” PVC Adapters 1 – 8ft. 1 ¼” PVC Pipe 1 – 1” PVC Cap ¼” screws 1 – Metal hook with screw end ~ 25ft. of chicken wire 1 – 1 ½” steel flange 1 – 1 ½” x 4” steel pipe 3 – STC-R brackets (home depot) Store SKU # 464163 1 – RTU2 brackets (home depot) Store SK...

Monster Mud Reaper

Parts List 2 – 90 degree PVC elbows 3 – 45 degree PVC elbows 1 – 4-Way PVC Cross 2 – 1 1/4 “ --> 1” PVC Adapters 1 – 8ft. 1 ¼” PVC Pipe 1 – 1” PVC Cap ¼” screws 1 – Metal hook with screw end ~ 25ft. of chicken wire 1 – 1 ½” steel flange 1 – 1 ½” x 4” steel pipe 3 – STC-R brackets (home depot) Store SKU # 464163 1 – RTU2 brackets (home depot) Store SK...

Pinterest
Search