Gary Kinsella
More ideas from Gary
Check out this project on RYOBI Nation - Needed a baby gate for the top of our basement stairs. I took out the existing basement door, and placed a 29" by 36" wooden baby gate. Made from 1x4 common boards, sanded it down, stained it Golden Oak, screwed it together with 1.25" wood screws, used a gate latch also.

Check out this project on RYOBI Nation - Needed a baby gate for the top of our basement stairs. I took out the existing basement door, and placed a 29" by 36" wooden baby gate. Made from 1x4 common boards, sanded it down, stained it Golden Oak, screwed it together with 1.25" wood screws, used a gate latch also.

Construction is complete...base made with 3.5 pallets, rear wall is two more pallets and 2x4s, bar is 3/4 inch plywood, and roof is 3 sheets of corrugated tin

Construction is complete...base made with 3.5 pallets, rear wall is two more pallets and 2x4s, bar is 3/4 inch plywood, and roof is 3 sheets of corrugated tin

Image on The Owner-Builder Network http://theownerbuildernetwork.co/wp-content/uploads/2014/03/Pallet-Outdoor-Bar-05.jpg

Image on The Owner-Builder Network http://theownerbuildernetwork.co/wp-content/uploads/2014/03/Pallet-Outdoor-Bar-05.jpg