Excited to share the latest addition to my #etsy shop: Moving Vehicle KIT - (old fashioned toy known as
1 Make a cross on the card
2 Push the drawing pins through the card at each end. Repeat this for the other wheel
3 Push the 4 wooden pieces down onto the pins
4 Repeat this and push the pins onto the 4 pieces of wood. It should then roll.
5 Make a small hook from a paper clip or small wire. Use this to pull elastic band through toy.
6. Pull the elastic band through the centre of the card - right through to the other side and secure with a small stick. Remove hook
7. Make sure the small stick is one side of the model to secure elastic band. Make sure the longer stick is NOT in the middle - then wind the stick round and watch the toy move