Explore Elevation Drawing, Grab Bars, and more!

Explore related topics

Elevation drawing shows the location of controls above the tub rim and below the grab bar and between the front edge of the tub and the tub ...

Elevation drawing shows the location of controls above the tub rim and below the grab bar and between the front edge of the tub and the tub centerline.

直角駐車

直角駐車

Figure 77 illustrates grab bars at transfer walls that are perpendicular to the pool wall and that extend the full depth of the transfer wall. Figure (a) shows in plan view two grab bars with a clearance between them of 24 inches minimum. Figure (b) shows in plan view one grab bar with a clearance of 24 inches minimum on both sides. Figure (c) shows in side elevation a height of the grab bar gripping surface 4 to 6 inches above the wall, measured to the top of the gripping surface.

Figure 77 illustrates grab bars at transfer walls that are perpendicular to the pool wall and that extend the full depth of the transfer wall. Figure (a) shows in plan view two grab bars with a clearance between them of 24 inches minimum. Figure (b) shows in plan view one grab bar with a clearance of 24 inches minimum on both sides. Figure (c) shows in side elevation a height of the grab bar gripping surface 4 to 6 inches above the wall, measured to the top of the gripping surface.

A grab bar is shown with a projecting object mounted above and below it.  Projecting objects must spaced 1 ½ inch (38 mm) minimum below and ...

A grab bar is shown with a projecting object mounted above and below it. Projecting objects must spaced 1 ½ inch mm) minimum below and 12 inches mm) minimum above the grab bar. Recessed objects can be spaced immediately above and below.

Figure 48(a) shows bench back support in plan view 42 inches in length minimum; figure (b) side elevation of back support extending 2 inches maximum above the top of the seat to a point 18 inches minimum above the seat.

Figure shows bench back support in plan view 42 inches in length minimum; figure (b) side elevation of back support extending 2 inches maximum above the top of the seat to a point 18 inches minimum above the seat.

Figure (a) is an elevation drawing showing rear grab bars, one mounted 33 to 36 inches (840 to 915 mm) above the finish floor, and one…

Figure (a) is an elevation drawing showing rear grab bars, one mounted 33 to 36 inches to 915 mm) above the finish floor, and one…

Figure (a) shows a removable in-tub seat in elevation and plan views that is 15 to 16 inches (380 to 405 mm) deep and 17 to 19 inches (430 t...

Figure (a) shows a removable in-tub seat in elevation and plan views that is 15 to 16 inches to 405 mm) deep and 17 to 19 inches t.

This figure shows an alternate roll-in shower with a seat.  A grab bar extends on the wall opposite the seat and is 6 inches (150 mm) maximu...

This figure shows an alternate roll-in shower with a seat. A grab bar extends on the wall opposite the seat and is 6 inches mm) maximu.

Size and Spacing of Handrails and Grab Bars

Grab bar, Tub Seat and Mirror Structural Requirements

Imagen relacionada

Imagen relacionada

Economy 2 Car Garage Plan E480-2 By Behm Design.  20 x 24, no attic space.  Works well for our home lot.

Economy 2 Car Garage Plan By Behm Design. 20 x no attic space. Works well for our home lot.

Figure 74 shows in plan view clear deck space of 60 by 60 inches minimum. Figure (a) shows this space centered at one grab bar. Figure (b) shows this space centered on the clearance between two grab bars.

Figure 74 shows in plan view clear deck space of 60 by 60 inches minimum. Figure (a) shows this space centered at one grab bar. Figure (b) shows this space centered on the clearance between two grab bars.

This is a PDF Plan available for Instant Download.  1 RV, big-rig, or bus garage + 1 car garage.  Sq. Ft: 1,600 (202 storage) Building size: 36-0 wide, 48-0 deep Roof pitch: 4/12 & 2/12 Ridge height: 20 Wall height: 16 & 10 Foundation: Slab Lap siding 2x4 walls standard. Basic dimensions for 2x6 walls also provided.  PLANS INCLUDE: Elevations Exterior / Interior Dimension Plan Floor / Ceiling Framing Plan Roof Framing Plan Cross Section Door & Window Schedule L...

This is a PDF Plan available for Instant Download. 1 RV, big-rig, or bus garage + 1 car garage. Sq. Ft: 1,600 (202 storage) Building size: 36-0 wide, 48-0 deep Roof pitch: 4/12 & 2/12 Ridge height: 20 Wall height: 16 & 10 Foundation: Slab Lap siding 2x4 walls standard. Basic dimensions for 2x6 walls also provided. PLANS INCLUDE: Elevations Exterior / Interior Dimension Plan Floor / Ceiling Framing Plan Roof Framing Plan Cross Section Door & Window Schedule L...

An elevation drawing shows pool lift seat height to be 16 to 19 inches (405 to 485 mm) measured from the deck to the top of the seat surface...

An elevation drawing shows pool lift seat height to be 16 to 19 inches to 485 mm) measured from the deck to the top of the seat surface when in the raised (load) position.

Pinterest
Search