Explore Milling Machine, Metal Fabrication, and more!

Explore related topics

Picture

Homemade mill quill lock ever intended to fit a Sieg mill. Lever is fitted into the hex head and secured by a washer and screw.

Adapted the Taig T-bar cutoff tool to work on the 9x20. The blade is positioned at the back & upside down. Using a back cutoff tool, forces pull the blade upward above centerline & away from the part possibly  reducing chatter. For max rigidity during cutoffs, keep the blade as short & close to the chuck as possible.

Adapted the Taig T-bar cutoff tool to work on the 9x20. The blade is positioned at the back & upside down. Using a back cutoff tool, forces pull the blade upward above centerline & away from the part possibly reducing chatter. For max rigidity during cutoffs, keep the blade as short & close to the chuck as possible.

Resultado de imagen para homemade metal bending machine

A number of years back I was watching Reverend Gadget on Discovery channel where he featured a metal bender that he fabricated. Any tool that I can add to the garage will be another tool I can pick…

Machine small work unobstructed, A solution is to make a set of tool makers mini jaws, they clamp on to the regular jaws of the chuck so they expand and contract as normal.

Metal Chop Saw Clamp

fabricated tools that make your life better! - Page 3 - The Garage Journal Board

Metal Bender - Homemade metal bender constructed from flat steel bar stock and steel rods.

Homemade metal bender constructed from flat steel bar stock and steel rods. -Could also be scaled up for an exhaust bender

Various DROs fitted to mini lathe. Also note the carriage power fed in addition to the half nut feed.

Various DROs fitted to mini lathe. Also note the carriage power fed in addition to the half nut feed.

Pinterest
Search